Ceramic Wool Wick for Tabletop Fire Pit – 2 Pcs – Ceramic Wool Sponge to Extend Burn Time – Ceramic Fiber Insulation for Bioethanol Fuel Fireplaces, Portable Tabletop Fire Pits – 12″ x 8″ x 1/2″ Thick

• Material: Our printed door mats are made from 100% recycled, post consumer polyester (PET)
• Backing: 100% premium nitrile rubber backing (Containing 34% post-industrial recycled rubber) for maximum oil resistance, weight reduction and flexibility. Suitable for underfloor heating.
• Border: 100% premium nitrile rubber border (Containing 34% post-industrial recycled rubber) with cleverly designed bevelled edges for easy wheeled access.
• Colours: Branded door mats can be printed using a palette of 100 standard colours. Our designers also have access to a bank of over 16 million colour possibilities for custom mat printing.
• Border width: 2cm
• Mat depth: Approx. 9mm (standard backing for bordered mats) Approx. 12mm (thicker backing for recess mats)
• Slip resistance: NFSI High-Traction certified
• Fire classification: Passes BS 4790 (1987) determination of the flammability of textile floorcoverings.  Low radius effect of ignition.
• Static electrical propensity: STATIC CONTROL ISO 6356 (2012) Determination of the static electrical propensity- walking test:0.3kVolts.  Satisfies IBM test requirements
• Dirt absorption: Excellent dirt-catching performance
• Guarantee: 100% customer satisfaction guaranteed or we will replace your mat for free
• Cleaning: Wash your logo door mats at the recommended temperatures of between 40 and 50 degrees Celsius.  Do not exceed 50 degrees
• Drying: Strongly recommend tumble-drying of logo door mats as part of the full processing cycle for effective drying. The mat temperature should be between 60-80 degrees Celsius
• Indoor/Outdoor Use: The custom floor mats are ideal for internal use
• Tolerance: +/- 2%
• Custom sizes: Custom floor mat sizes available between widths of 200cm and lengths of 550cm. For instant quotes complete our online enquiry form, alternatively, call 01565 756152 or email [email protected]

Logo door mats can be cleaned in several different ways.

1. They can be commercially laundered (see Laundering Instructions *)
2. Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications);
3. Cleaned with an extractor, or hosed off as necessary to remove heavy soil.
4. Hang to dry. Mats should always be dry before they are placed back in service.

Printed logo door mat – washing instructions:

1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
4. Rinse, 2 Min. on a high water level with cold temperature
5. Rinse, 2 Min. on a high water level with cold temperature
6. Extract on low speed, 1-2 Min.
7. Shake out with the drum turning, 1 Min.
8. Extract, on a maximum of 250G, 3-5 Min.
9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
10. Cool down, 5 Min.

Additional Recommendations:

• For Heavy Soiled Mats, increase temperature up to max. 60°C.
• Break should not exceed pH of 9,5; use low pH non-ionic detergents.
• Do not over dry mats; Basket-temperature of dryer should not exceed 82 °C.
• If mats are not dried, final rinse can be increased to 49 °C. This will reduce moisture retention following extraction.
• Lay mats flat following removal from washer; allow mats to cool before rolling

Our branded door mats are perfect for use in a range of settings:

• Entrances & exits
• Areas to highlight warnings, guidance around your building
• Hallways
• Lifts
• Receptions
• Offices
• Hotels
• Schools, colleges and universities
• Retailers
• Events
• Restaurants
• Bars
• Hospitals
• Hospitality and Leisure
• Garages and workshops
• Public buildings