3000W or 4000W 4S 8S 10S 12S 13S 14S 15S 16S 20S 24S Li ion Battery or Lifep4 Battery charger with 100A 80A 60A 50A Constant charge current

Description This high quality alloy type charger has such characteristic as belowing  : 1. Application : For 3S~24S Li ion or Lifepo4 Battery  with 45A~100A constant Charge  current 2.AC power :110V/60Hz(90V~130V), 220V/50Hz(180V~240V)( AC plug will be shipped in according to client’s country demand based on shipping address ,if you want to change the AC plug , please leave message to us ) 4.Dimension :365*320*116mm(4KW charger ) and 345*200*96mm (3KW charger ) 5. Weight :10.0kg(4KW) 8.0KG (3KW) 6.short-circuit protection,charger o/p current automatically when short-circuit. 7.overload protection:charger o/p current limited automatically when overload. 8.2-stages charging mode: CC(constant current), CV(constant voltage) . 9.Excellent fan cooling technology enable your charger get away from any potential over-heating risk and make your charger works longer and more stable . 10.Charging state:two LED display. 11.Fuses works to provide double protection from any external damages 12.Automatically cut-off : the charger cut-off automatically when the battery was fully charged , 13.Efficiency: ≥95 %( full capacity) Photos for reference : 3S 4S 8S 10S 12S 13S 14S 15S 16S 20S 24S Li ion or Lifepo4 battery charger High quality Li ion or Lifepo4 Battery charger 12V 100A 24V 100A 36V 80A 48V 60A 60V 50A 72V 40A Battery charger Charge Modes: Please inform us with Output connector will be for your charger by leaving a message with order ,For Example : AC: A  DC: No 3, then we can prepare correct connctor in according to your message without problems  Operation Instructions : 1.To check if your local power supply conformsto charger input voltage 110 or 230V,then connect the charger system to a wall socket , if charger has switched to OFF position ,it must be set to ON status . 2.LED1 (RED ) confirms AC power on an LED2 Green confirms if the charger connects well or not 3.Connect the plug or the DC output cord to battery terminals ,it indicates the charger is charging the battery when the red light turns on ,and the battery will be fully charged when the battery was charged fully . Notes : if the charger with a Relay for reverse polarity prouction , it does not have output voltage and current when the Charger AC power on but disconnecting with the battery , it will have voltage an current output when it connects with battery , if the charger has a fuse instea of Relay for reverse polarity protection , it has output once AC power on . Precautions  1. the phenomenon of sparking is normal when it connects to the battery because of high current 2. This charger is designed for charging lithium tupe batteries only 3. Avoid charging the wrong type battery 4. Always place the charger in well-ventilated and dry environments 5. The charger is designed with aluminum case as its heat sink , do not cover it to avoid the case from being overheated while charging 6. Do not disassemble charger ,take it to qualified service person when service or repair is required Shipment  1. Orders processed timely after the payment verification. 2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 3. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. 4. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery. 5. Delivery time depends on destination and other factors, If you don`t receive the item after 20 days, please contact us, We will track.