Watch Video 10S Active Balancer module for 36V li ion battery equalizer
$ 20.79
Complete the form below to receive an instant quote;
1.
Instant quote emailed to you!
2.
Free artwork designs created in just 2 hours!
3.
Free UK delivery in approx. 3-5 working days!
Add your size and design
Delivery – Approx. 3-5 working days from approval of designs
This is The Active Balancer and equalizer for 10S Li ion 36V Battery BMS With 5A Balance current . and more module can be connected in series to work for more series battery pack with our connection methods ,client can select suitable parameters for your Battery and This 10S Li ion 36V battery active balancer module can work with 10S 36V Li ion or Lipo Battery ,client can select suitable parameters in according to your battery specification demand : 1) Adopted high end integrated controlling chip with intelligent algorithms which will automatically keep your battery system in idea condition with good balance performance. our active balancer will balance all lower cells by transferring energy from whole system average voltage to lower cells with our unique dynamic algorithm, the balance current will be adjusted automatically based on voltage difference,it is unlike normal neighbouring balance mothods in our current market . 2）Balance precision degree reach less than 10mV,and power consumption in working status reach less than 250mW, and it automatically went to sleep mode once balance work finished ,with less than 0.5mW power consumption . 3) Balance start conditions : when cells voltage difference reached more than 45mV ,( also it should meet balance stop conditions ) then , the balancer will start Balance , the Balancer will stop work where meets any one of these below conditions .A. cell everage voltage reached below 2.7V±0.05V ( for Li ion cell )B. if single cell voltage reached below of 2.7V±0.05V ( for Li ion cell ) C.if cell voltage difference reached below than 45mV . the module will automatically stop work to prevent any possible current drain or overdischarged problems which would hurt the health of the Battery system . 4) With Compact size in design comparing other normal Balancer , our Balance can be installed and work together with your BMS which can save your precious installtation space . 5) Comparing with Capacitor balance , our balance method can greatly low the energy loss and offer big balance current ,provide more safe balance solution for the battery system,and will never harm the low capacity cell’s life so as to keep your whole system in good healthy with real consistency . 6) It can significantly improve your cells consistency and therefore improve your battery capacity and work life time. 7) With high safty and low Power consumptions , can be installed inside of the battery system to work with battery in whole life to greatly improve battery compensive performance such as capacity and voltage . 8)modules can be connected in series to work for more series battery with our connection diagram . In order to support our custom with certain quantity , our client can use this coupon code to get better cost : 200USD~500USD: coupon code: 20200806 500USD~1000USD: coupon code : 20200807 1000USD above: Coupon Code : 20200808
- Material: Our printed door mats are made from 100% recycled, post consumer polyester (PET)
- Backing: 100% premium nitrile rubber backing (Containing 34% post-industrial recycled rubber) for maximum oil resistance, weight reduction and flexibility. Suitable for underfloor heating.
- Border: 100% premium nitrile rubber border (Containing 34% post-industrial recycled rubber) with cleverly designed bevelled edges for easy wheeled access.
- Colours: Branded door mats can be printed using a palette of 100 standard colours. Our designers also have access to a bank of over 16 million colour possibilities for custom mat printing.
- Border width: 2cm
- Mat depth: Approx. 9mm (standard backing for bordered mats) Approx. 12mm (thicker backing for recess mats)
- Slip resistance: NFSI High-Traction certified
- Fire classification: Passes BS 4790 (1987) determination of the flammability of textile floorcoverings. Low radius effect of ignition.
- Static electrical propensity: STATIC CONTROL ISO 6356 (2012) Determination of the static electrical propensity- walking test:0.3kVolts. Satisfies IBM test requirements
- Dirt absorption: Excellent dirt-catching performance
- Guarantee: 100% customer satisfaction guaranteed or we will replace your mat for free
- Cleaning: Wash your logo door mats at the recommended temperatures of between 40 and 50 degrees Celsius. Do not exceed 50 degrees
- Drying: Strongly recommend tumble-drying of logo door mats as part of the full processing cycle for effective drying. The mat temperature should be between 60-80 degrees Celsius
- Indoor/Outdoor Use: The custom floor mats are ideal for internal use
- Tolerance: +/- 2%
- Custom sizes: Custom floor mat sizes available between widths of 200cm and lengths of 550cm. For instant quotes complete our online enquiry form, alternatively, call 01565 756152 or email [email protected]
Logo door mats can be cleaned in several different ways.
- They can be commercially laundered (see Laundering Instructions *)
- Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications);
- Cleaned with an extractor, or hosed off as necessary to remove heavy soil.
- Hang to dry. Mats should always be dry before they are placed back in service.
Printed logo door mat – washing instructions:
- Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
- Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
- Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
- Rinse, 2 Min. on a high water level with cold temperature
- Rinse, 2 Min. on a high water level with cold temperature
- Extract on low speed, 1-2 Min.
- Shake out with the drum turning, 1 Min.
- Extract, on a maximum of 250G, 3-5 Min.
- Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
- Cool down, 5 Min.
Additional Recommendations:
- For Heavy Soiled Mats, increase temperature up to max. 60°C.
- Break should not exceed pH of 9,5; use low pH non-ionic detergents.
- Do not over dry mats; Basket-temperature of dryer should not exceed 82 °C.
- If mats are not dried, final rinse can be increased to 49 °C. This will reduce moisture retention following extraction.
- Lay mats flat following removal from washer; allow mats to cool before rolling
Our branded door mats are perfect for use in a range of settings:
- Entrances & exits
- Areas to highlight warnings, guidance around your building
- Hallways
- Lifts
- Receptions
- Offices
- Hotels
- Schools, colleges and universities
- Retailers
- Events
- Restaurants
- Bars
- Hospitals
- Hospitality and Leisure
- Garages and workshops
- Public buildings
Why Choose Mats Nationwide?
We are a leading provider of the highest quality entrance, logo, and custom floor mats for commercial and domestic customers in the UK and overseas. Since 2008, we have met strict quality standards; supplied NFSI certified high traction mats, and put outstanding, unrivaled customer service as our number one priority. Our safety-enhancing floor mats help customers enjoy cleaner, safer facilities.
Quick and Reliable UK Delivery
Safety tested & made to strict quality standards
NFSI certified high-traction mats available
High performance and long lasting
